source-ip
-
- Last UpdatedMar 07, 2025
- 1 minute read
Sets the source IP address of an ERSPAN mirror.
A source IP is not configured for the ERSPAN profile.
ip-addr
| Specifies the IP address in the format A.B.C.D.
|
Monitor profile mode
The source IP address can be any IP on the router.
The no form of the command removes the IP address from the monitor profile.
The following example sets the source IP address in ERSPAN profile 3.
device(config)# monitor-profile 3 type ERSPAN
device(config-monitor-profile 3)# source-ip 2.2.2.2
device(config-monitor-profile 3)# exit
Release version | Command history |
---|---|
08.0.40 | This command was introduced. |