flash-timeout
-
- Last UpdatedSep 05, 2019
- 1 minute read
Configures the flash timeout duration.
The default flash timeout value is 12 minutes.
time
| Specifies the flash timeout value in minutes. Valid values range from 12 to 120 minutes.
|
Global configuration mode
The new timeout value will be effective from the next flash operation.
The no form of the command removes the flash timeout configuration and restores the default value of 12 minutes.
The following example configures the flash timeout value as 30 minutes.
device(config)# flash-timeout 30
Release version | Command history |
---|---|
08.0.30 | This command was introduced. |
08.0.90 | The maximum timeout value was increased to 120 minutes. |