ipv6 ospf area

Enables OSPFv3 on an interface.

ipv6 ospf area area-id | ip-addr
no ipv6 ospf area

OSPFv3 is disabled.

area-id
Area ID in dotted decimal or decimal format.
ip-addr
Area ID in IP address format.

Interface subtype configuration mode

This command enables an OSPFv3 area on the interface to which you are connected.

The no form of the command disables OSPFv3 on this interface.

The following example enables a configured OSPFv3 area named 0 on a specific OSPFv3 virtual Ethernet (VE) interface.


device# configure terminal
device(config)# interface ve 1
device(config-vif-1)# ipv6 ospf area 0