Configuring a LAG

The following configuration procedures are used to configure a LAG. Depending upon whether you are configuring a static, dynamic or keep-alive LAG, the configuration procedures may or may not apply as described:

  • Creating a Link Aggregation Group
  • Adding Ports to a LAG
  • Configuring the properties of the LAG on the LAG virtual interface.
  • Configuring the Load Sharing Type (Optional)
  • Specifying the LAG Threshold for a Static LAG Group (Optional)
  • Configuring an LACP Timeout (Optional). The LACP Timeout is Long by default.
  • Configuring LACP operation mode as active or passive (Optional). The LACP operation mode is Active by default.