Enabling PIM6 SM Snooping on a VLAN

You can enable PIM6 SM snooping for a specific VLAN. This setting overrides the global setting.

  1. Enter global configuration mode.
    device# configure terminal
  2. Configure a VLAN.
    device(config)# vlan 20
  3. Add the ports that are connected to the device and host in the same port-based VLAN.
    device(config-vlan-20)# untagged ethernet 1/1/5 ethernet 1/1/7 ethernet 1/1/11
  4. Enable PIM6 SM snooping on the VLAN.
    device(config-vlan-20)# multicast6 pimsm-snooping

The following example enables PIM6 SM snooping for VLAN 20 for the ethernet ports 1/1/5, 1/1/7, and 1/1/11.

device# configure terminal
device(config)# vlan 20
device(config-vlan-20)# untagged ethernet 1/1/5 ethernet 1/1/7 ethernet 1/1/11
device(config-vlan-20)# multicast6 pimsm-snooping